The solar road stud can also be applied in common roads, paths of countryside and other roads, which is widely used to reduce the traffic accidents cause by weather conditions or personal problems.
Never stop working hard! On November 11st, 2015, 8,000 pieces NK-1004 reflective road stud were purchased by our clients from the Republic of Congo. The road studs were favored by people of the Republic of Congo for long terms, and they all
A large number of solar road studs of NK-RS-A6-1 are just produced by NOKIN. The NK-RS-A6-1 is the hot sale product of NOKIN, which is one of the professional road stud suppliers in China.
Battery life is an important factor that decide the life of the solar road studs, thus the choice of the battery is very important.
The light given out by cars can be reflected by the leds of the road cat eyes to let the drivers know the front road condition.
Safe producing measures: 1. The whole set of safety facilities should be equipped, such as the safety signs, reflective safety clothing. 2. All the stuffs should go to work with certificates to ensure the safety and quality of the installat
Although the performance of active road stud is good, grooving, wire embedding and potting on the road should be made when installation with huge work quantity.
The raised pavement marker is a kind of aluminum road stud which can reduce traffic accidents at intersections of crossings of the road and give guidance and hazard warning at night or bad weathers. The solar panel on it absorbs sunlight in
In order to prevent arbitrary parking of vehicles, road studs are installed. After the removal of parking locks, these places become clean and tidy.
If the installation place of road stud is uneven, it will cause non-uniform load of road studs directly, and the press on the road studs will focus on the raised and sink parts of them.
The aluminum solar road marker is an environmentally friendly road facility which can delineate the road clearly from up to 800 meters away. It has strong impact resistance and abrasion resistance.
Install the road stud on the road for two years and observe the shell, the reflector surface and internal reflector once half a year and divide the observed result into five grades.
The solar reflective road stud can help the drivers keep away with the agglomerate fog. In some foreign countries, the solar reflective road studs are installed in expressways to warn the drivers about the way ahead to avoid the threat cause
The road studs, which are also called raised pavement markers, can be divided into several types: plastic road studs, cast aluminium road studs, and solar road studs. Wish this scenery line of the city can always be young and beautiful!
Active emission of solar road studs can not only prevent mist interference in the largest extent, but get rid of the dependence of the drivers on car lights with farther and better visual distance.
The road studs that are widely used nowadays can be classified into several types according to the materials, and they are cast aluminium road studs, PC road studs, porcelain road studs, and amber road studs.
The integrated solar street light can be used in various roads, auxiliary roads, paths of residential areas, courtyard, mine areas, parks, parking lots, where need night illumination.
The solar road stud of NK-RS-A6-1 is a new design and patent product of NOKIN TRAFFIC FACILITY. It can stand the pressure of 30 tons so that cars can drive on the solar led marker light directly.
The solar road studs are the alternatives of the traditional reflective road studs, which is also known as cat eyes, which has served on the roads for decades of years. The cat eyes are invented around 1930s by Yorkshireman, Percy Shaw, who
The reflective road stud of NK-1001 makes great improvements on main roads of Paraguay, and it makes the roads much brighter.
The solar road markers can be divided into the raised type and embedded type according to the difference of installation position.
The appearance of the solar street light provides convenience for the activities of people at night. And our country now pays more attention on the development and construction of the rural areas
After installation of road stud, there should be a period of time for curing the glue to make the road stud and ground bonded closely, four hours are recommended.
Generally speaking, the factors influence the service life of the solar street lights are mainly the light source, light source initiator, solar controller and the accumulator
After these three tests, it is easy to know that the solar road studs of our company perform perfect in water-proof.
The reflective studs save energy, which is environmentally friendly. They can not only serve for people’s daily life, but do no harm to the environment.
Solar studs are a traffic facility which has safety function and are wide used all over the world. And this kind of traffic facility also plays a key role in rainy or foggy days when compared with the old type road studs.
A set of intelligent zebra crossing system is installed in the Linkonggang Avenue of Dong xihu District recently, and it will give pre-warning when vehicles passing, and the road studs on the zebra crossing will flashing when people go acros
75.000 pieces NK-1001 reflective road stud were purchased by our Chile client on August 18th, 2015.
Driving on the 107 national road, the flashing road studs are just like twinkling stars at night to guide the drivers and bring them safety.
Use IC control as much as possible to reduce the volume of electronic circuit and the pressure on the electronic parts
The solar reflective road markers are installed on the ground, and it may crash by all kinds of vehicles, so the pressure resistance of the solar cat eye should be good.
There is an essential parameter for the solar road studs, which is the IP protection grade, and what does the IP protection grade really mean.
The following are methods to improve the sealing performance of solar road studs:Separation design.
The reflective pavement marker of aluminum shell has strong pressure resistance, and the pressure resistance of NK-RS-A6 is over 20 tons
Some drivers also express that they hope more road studs can be installed in other roads.
On January 21st, 2015, our Thailand clients purchased 40,000 pieces NK-1002 reflective road stud in order to decrease the risk of traffic crash in their country.
Knowing more knowledge about the solar road stud with foot, let’s observe how the product is produced.
The following are several kinds of effective method to improve the compressive performance of solar road stud
The standard of road stud in America is ASTM4280, and the standard of our country takes the ASTM 4280 standard as reference, and adopted it greatly in the premise of our practical condition.
The road studs we refer here is mainly applied on the roads, which are also called road studs.The quality testing method of America can be divided into two types: on the sample testing, which is almost the same with that of China.
The most frequently occurred problem of solar road stud with foot screw is the separation of the upper and lower parts.
The clients of South Africa has purchased a large number of road studs of NK-RS-A6-1 from NOKIN. And several days ago, they have just finished the installation and testing.
In order to guarantee the smooth and safety of traffic at night or in bad weather conditions, about 700 solar active illuminating traffic signs are installed in several road intersections in Rencheng District recently. Combined with the adv
On Apr 19th, 2016, our Canada client purchased 1,300 pieces of solar led cat eye road stud of NK-RS-D1.
The main products of solar lights are solar street light, solar courtyard light, solar lawn light, solar road stud and solar signal light.
NK-1002 reflective Road Stud is made of high quality ABS material, and the reflection of reflective road studs can meet ASTM D4280 and EN 1463-1 standard.
The choosing of the cat eye road markers will influence the installation process and working condition of the cat eye road markers.
the lamppost can be used as the air-terminal system. The thunderstorm happens frequently, the LED solar street light manufacturers should be pay more attention on how to improve the lightning protection of their products.
The environmental condition of solar road stud is complex and changeable, the temperature and humidity may also be quite different.
Copyright © 2011-2018 by NOKIN All Rights Reserved.