Due to its good outline of the road, solar road stud greatly improves the safety of driving at night. A good solar road stud should have three elements in the process of use: compression, continuous brightness, and firm installation. Most people pay attention to the first two points in the use process, but ignore the installation of solar studs. As a result, the falling off rate is very high in a short period of time. Attention should be paid to the following points (necessary materials and preparation) for a firmly installed solar road stud.
1、Safety protection:
A number of road cones, construction diversion plate sets, batons, reflective clothing for each person. Before departure, everyone must put on reflective clothing and put construction signs and road cones at the construction site
2、Tools:
Electric hammer, pan ruler, knife, small plastic barrel, chalk, generator, electric hand drill, glue mixer.
3、Products:
4、Auxiliary materials:
epoxy resin
In addition, roads need to be closed to install solar road stud. The road shall be sealed in advance, and the solar energy construction signs and solar warning lights shall be placed.
With the wide application of solar road stud in domestic high-grade highways and municipal roads, more attention has been paid to the quality problems and service life of solar road stud. However, in the actual application process, the phenomenon of damage and service life reduction of solar road stud often occurs because of installation problems. So we must pay more attention to it.
