With the development of economy, solar facilities have already been am important part in the beautification of cities. In order to ensure the project of
solar street lights, the supplier of solar road facilities and workers responsible for installation should be join in the project of solar road illumination in advance. And the following aspects should be taken into consideration:
1. In the section of rock bedding and the weathered stone, it is difficult to meet the demands of distributed grounding and sectional grounding, and the conductor like galvanized flat steel can be applied in connection. The connection should be safe and reliable, and additional protection should be applied to the connect, which should also connect with the precast to ensure that all the light posts are connected with the ground firmly. The high-pole lights scatter here and there, which mainly connect with the ground through their foundations. The resistance reducing agent can be used to decrease the ground resistance.
2. Compliance with the operation flow strictly when doing lifting operations. The electric power circuit and other circuit around the lifting equipments should be paid more attention, so is the structures around them. The lifting position should be set properly and it should be adjusted timely after positioned.
3. Pay more attention to the beautification of the solar street light post after installation. From the foundation construction, the position of the lights should be placed in a line and the lineal change should be designed according to the design of the roads. The light posts should be fix straightly toward the ground, and the attachment weld and the access holes should keep away with the main line direction and they should be placed in one line. The angle and direction of the cantilever of the posts should be coordinated.
4. The internal parts of the solar street light should be installed firmly to avoid the problems caused by loosen by wind or poor contact. The lamps should be fixed with the light posts safe and reliable, so is the light posts with the cantilever. Every section of the high-pole lamp of the solar street light should be fixed in place, and the crane should be fixed with the lamp firmly. The lifting system should be safe and reliable with the function of moving up and down, spacing and positioning.
5. Comprehensively understand the features of the solar street light, light source and the light post and combines the current condition of road, illuminating standard and the investment budget to choose the proper solar street light, light source and light post to give full play to the high efficiency of the light source and the light distribution of the solar street light and the advantages of all the parts.
6. Under the guaranteed condition of the illumination performance, it will be better to extent the intervals between the solar street lights to decrease the number of solar street lights; to prolong the length of the post of solar street lights to improve the illumination effect. It will be better to set the separation strip on the road to save the cost of project.
7. The foundation of the solar street lights should be designed according to the practical condition and geology condition of the project of solar street lights to ensure the foundation is firm and dependable. The prepared hole in the lamp holder should match the prepared screw bolt, and the position should be exact, and the prepared embedded length and the outer length should be appropriate. The screw thread should be protected properly to provide convenience for the positing for lifting.
8. The positioning of light posts, foundation construction and embedded should be done in advance, which is convenient to find problems timely and give time to change. It is a guarantee for quality and it can save investment.
